Entrepreneurship And Economic Growth Of A Country

Entrepreneurship is generally described as the ability of an individual or a group of individuals to create or discover an opportunity and utilize it to the benefit of the society, which, in turn, will bring success to the innovators and their organisation (Hart, 2003). The relationship between entrepreneurship and economic growth of a country has increasingly gained a lot of interest from economists and policy makers over the years (Steyaert and Hjorth, 2008). However, while some view it as a direct relationship, others see it as an indirect kind of relationship. Entrepreneurship is a multifaceted and complex concept and described differently based on the context of study and disciplines (Hart, 2003). Hart (2003) noted that main research†¦show more content†¦In the past decades, there has been a growing interest regarding the concepts of economic development and entrepreneurship. Researchers have concluded that although economic development theory can still be argued to lac k a ‘general theory’ of entrepreneurship, one that could encompass a variety of development outcomes, progress has been made in extending the notion and understanding of entrepreneurship in economic development (Naude, 2010). On the other hand, international organizations, governments and policy makers have shown a greater attention to the function fulfilled by entrepreneurship in generating economic development. Entrepreneurship is important because it is the economic mechanism through which inefficiencies in economies are identified and mitigated (Grigore and Dragan, 2015). According to OECD (1998) â€Å"entrepreneurship is central to the functioning of market economies† (Carree and Thurik, 2003). Economic experts have abandoned their traditional approach to economic development based mainly on recruiting large companies with different financial and fiscal inducements. Entrepreneurship is spreading recognized by government officials throughout the world not onl y as â€Å"a key mechanism forShow MoreRelatedA Review of the Role of Entrepreneurship in Stimulating Economic Growth, Reducing Unemployment and Increasing Level of Income in Low to Middle Income Countries.3874 Words   |  16 PagesA REVIEW OF THE ROLE OF ENTREPRENEURSHIP IN STIMULATING ECONOMIC GROWTH, REDUCING UNEMPLOYMENT AND INCREASING LEVEL OF INCOME IN LOW TO MIDDLE INCOME COUNTRIES. INTRODUCTION This paper sets out to review the role of entrepreneurship in stimulating economic growth, reducing unemployment and increasing levels of income in low to middle income countries. Nieman and Nieuwenhuizen (2009) states that the contribution of entrepreneurs to the economy can be attributed to their special qualities. TheyRead MoreRelationship Between Entrepreneurship And The Economic Development Essay1091 Words   |  5 Pagesthe relationship between entrepreneurship and the economic development in Saudi Arabia. Entrepreneurship is the process of managing, organizing and developing a business venture in a competitive environment that is dynamic (Kuratko 2016 pp3). An entrepreneur is an inventor, leader, innovator, and pioneer and most significantly, a performer. The heart of a national advantage is often pegged on entrepreneurship. The operation of an enterprise is within the entrepreneurship ecosystems that include governmentalRead MoreStartup Americ A Government Initiative1322 Wor ds   |  6 Pagesinitiative that is used to inspire and produce entrepreneurship throughout the country. By holding the belief that innovation is the backbone of this country, Obama created this campaign in order to create and develop entrepreneurship. As a result, the goal is trying to achieve sustainable growth and quality jobs in the economy. Overall, Startup America is a process that believes entrepreneurship is a core American value that allowed for the country to be where its at, therefore, this campaign isRead MoreOverview Of Schumpeter Denoted Entrepreneur As An Essential Element For The Economic Growth And Entrepreneurial Process1339 Words   |  6 PagesSchumpeter denoted entrepreneur as a key in the economic growth and entrepreneurial process as a prime element in the progress and advancement of economy. Again he stated that entrepreneurship is an essential element for the development of any economy and economic and political framework condition would not affect the g rowth. The benefits due to entrepreneurship to community will be greater in those economies where entrepreneurs have flexibility to operate, to expand their ideas, and to obliterateRead MoreRelationship Between Entrepreneurship And The Economic Development Essay1314 Words   |  6 Pagesthe relationship between entrepreneurship and the economic development in Saudi Arabia. Entrepreneurship is the process of managing, organizing and developing a business venture in a competitive environment that is dynamic (Kuratko 2016 pp3). An entrepreneur is an inventor, leader, innovator, and pioneer and most significantly, a performer. The heart of a national advantage is often pegged on entrepreneurship. The operation of an enterprise is within the entrepreneurship ecosystems that include governmentalRead MoreHow Entrepreneurship Has An Effect On The Economy Of India1557 Words   |  7 Pages In the 21st century Entrepreneurship is one of the fundamental driving variable in job development. Entrepreneurship has dependably had a variable in monetary advancement and has assisted with job creation. Be that as it may, in the present time it has quickened like never before. Entrepreneurship is favorable for the development of a country’s economic system for various reasons. Business enterprise has been surprisingly resurgent in the course of recent decades in nations that accomplished generousRead MoreThe Theory Of Entrepreneurship As A Key Lever For Growth Restoration And Job Creation1134 Words   |  5 Pagesthe lowest ranked country in the EU, in the context of the ongoing sovereign debt crisis resulting in the highest levels of unemployment within the EU. Their economy is mainly based on tourism, trade, and agriculture. Thus, lacking an established competitive industry and an entrepreneurship-friendly environment, which continues to constrain Greece’s abilit y to emerge from the crisis. To overcome these difficulties, Greece must embrace entrepreneurship as a key lever for growth restoration and jobRead MoreRole of Entrepreneurship in Economic Development1047 Words   |  5 PagesRole of Entrepreneurship in Economic Development Entrepreneurship: Entrepreneurship is the attempt to create value through recognition of business opportunity, the management of risk taking appropriate to the opportunity and through the communicative and management skills to mobilize human financial and material resources necessary to bring a project to fruition. According to A. H. Cole, Entrepreneurship is activity of an individual, undertaken to initiate, maintain or aggrandize profit byRead MoreEntrepreneurship Assessment Strategies For Economic Development1615 Words   |  7 PagesEntrepreneurship assessment strategies for Economic Development: Developing an implementation case for Kingdom of Saudi 1.Introduction Entrepreneurship is an extremely important aspect of the modern economy. Entrepreneurship entails improving business and the development of areas that are good for a business, people and the overall economy of a country (Galindo, Mà ©ndez-Picazo, 2013). Since the need for entrepreneurship has been widely discussed and proven through research (Isenberg, 2010; KhanRead MoreFactors That Can Promote or Hinder Enterpreneurship1492 Words   |  6 PagesLIST AND EXPLAIN FACTORS THAT CAN PROMOTE OR HINDER ENTREPRENEURSHIP. Entrepreneur: An entrepreneur is a person who starts an enterprise. He searches for change and responds to it. A number of definitions have been given of an entrepreneur- The economists view him as a fourth factor of production along with land labour and capital. To put it very simply an entrepreneur is someone who perceives opportunity, organizes resources needed for exploiting that opportunity and exploits it. Computers, mobile

Civil Rights/Secret Life of Bees - 986 Words

Bridget Baker Mrs. McQuade Period 2 4/10/12 Racial Discrimination and Segregation In 1619 the very first African Americans arrived in America, coming over for the purpose of forced slavery. It’s been nearly four hundred years since then and African Americans are still not treated completely equal. But throughout the years major steps towards equality have been made and as a whole the United States is close to reaching this goal. The first key action taken was abolishing slavery in 1865, but African Americans didn’t start gaining equal rights until 1955 during the Civil Rights Movement. The African American Civil Rights Movement aimed to eliminate all racial discrimination and segregation in America and demonstrated throughout Sue†¦show more content†¦Next, Lily finds herself in the house of three African American sisters, seeking a place to live her. While contemplating lettering her stay, one of the sisters stress, â€Å"But she’s white†¦ â€Å" (Kidd 87). Though it seems as if it’ s the white girl being discriminated against, but in reality blacks know the trouble that this gives themselves and how much trouble they could get in for this. The integration of blacks and whites was not only rare because it was looked down upon, but also because consequences would be given. Lily grows more than a friendship with a young African American and regardless of their feelings it’s nearly impossible for them to become anything more because of the fear of him getting in trouble for it. He explains this to her as, â€Å"Lily, I like you better than any girl I’ve ever known, but you have to understand, there are people who would kill boys like me for even looking at girls like you,† (135). Even those whites willing to integrate could not do it by themselves and during the Civil Rights Movement it brought everyone together willing to desegregate races. It was not immediate, but racial discrimination and segregation have extremely lessoned. From the begin ning of America an ongoing battle with African American discrimination has occurred. In the Declaration of Independence written in 1776 itShow MoreRelatedAnalysis Of 60 s Music Tells The Story Of The Secret Life Of Bees1085 Words   |  5 Pages1960’s music tells the story of The Secret Life of Bees in chronological order. Several of the songs incorporated in the playlist are applicable to different events or characters in the story, as many of the events portrayed in it, such as running away, close relationships, and love have connections to multiple characters. This playlist will take you through a series of deep thought, emotion, and different connections to not only The Secret Life of Bees, but to life and culture in the 1960’s, and evenRead MoreThe Secret Life of Bees Movie Review Essay630 Words   |  3 Pages â€Å"The Secret Life of Bees† Movie Review â€Å"The Secret Life of Bees† is a movie that takes us through the incredible journey of a young girl named Lily Owens. She grows up with the horrible memory of the day she accidentally killed her mother. She and the family maid who has tried to fill the empty void as her mother, Rosaleen, escape the mistreatment that Lily receives from her father, T-Ray. After Rosaleen heard the news on T.V. about the Civil Rights Act being passed, she decided to takeRead MoreUnderground Airlines And The Secret Life Of Bees Tell Related1630 Words   |  7 Pagesand The Secret Life of Bees tell related thematic concepts through distinctly similar and different ways. Both Underground Airlines and The Secret Life of Bees discuss themes along the lines of, racism and prejudice brings pain and injustice, and to not judge a book by its cover. These two thematic concepts develop together throughout the course of each novel. Each novel has an individual narrative; Underground Airlines con taining one of thrills and suspense set in present day when the civil war hadRead MoreSue Monk Kidd : A Memory Of The Past1633 Words   |  7 Pageswrite her novel The Secret Life of Bees by the dreadful experiences she faced during her childhood, an early passion of literature, and finally her exploration of religious beliefs. Her childhood was most notably affected in the summer of 1964, when she witnessed public cruelty to blacks that, no doubt, haunted her for the rest of her life. Clearly, her first hand experiences that summer played an important role of setting it as a Civil Rights backdrop in The Secret Life of Bees. Sue Monk Kidd’s dreadfulRead MoreThe Secret Life of Bees and How It Is Classified Under the Southern Gothic Genre792 Words   |  4 PagesThe Secret Life of Bees within the Southern Gothic Genre Most southern gothic literature deals with the disturbed and flawed characters; one of the most famous writers of this genre is Edgar Allan Poe. The southern gothic genre is characterized by grotesque, gruesome, or unbelievable incidents. The southern gothic genre is portrayed in many ways. Lily, the main character, goes through many difficult life experiences and learns many tough lessons. This book does not have a happy ending like a fairyRead MoreThe Effect of Feminism on Society816 Words   |  3 Pagestoday women need to take a stand for what they are worth. Many of these strong willed women that are looking for change are leading characters in movies or novels. One book that truly captures the feminist movement and strong women would be The Secret Life of Bees by Sue Monk Kidd. In this novel Lily Owens and the Boatwright sisters present the strong woman figure that is known to embody the feminist movement. All throughout the history it has been known that women are not in the social rankings withRead MoreThe Secret Life Of Bees Themes Essay1585 Words   |  7 PagesThe Civil Right Act occurred in 1960 which allowed African-Americans more rights. In the novel The Secret Life of Bees many characters challenges and uncover the meaning of accepting taboo ideas. Set in 1964, Sue Monk Kidd’s The Secret Life of Bees suggests that accepting taboo actions does not necessarily compromises a person’s moral compass and can lead to an awareness and understanding of the world. Kidds foster the idea that racism is to be acknowledged. In the first couple of chapters ofRead MoreTheme Of Oppression In The Hunger Games1328 Words   |  6 PagesKatniss Evergreen: allowing Collins to convey how solidarity and fellowship can be the cure to oppression. Sue Monk Kidd while she was no dystopian author, she does use fiction to portray the historical events of the civil rights movement in her novel The Secret Life of Bees. Following the life of young Lily Owens, Kidd demonstrates the effects oppression can have on shaping ones identity and humanity. Brooks’, Collins’, and Kidd’s novel all manipulate the plights of their characters to demonstrate theRead MoreThe Year Of Wonders By Geraldine Brooks1630 Words   |  7 Pageshas demonstrated this profound relationship since human history first began, not only in their way of life, but in literature. For example, Geraldine Brooks, displays the oppressors, in her novel The Year of Wonders, by implicat ing strong men, and a powerful family; while the oppressed are numerous wives, and everybody inside of the village. Sue Monk Kidd displays oppression in The Secret Life of Bees, by recreating images of racism, between whites and blacks, in the American south during the mid-1900sRead MoreAuthor Sue Monk Kidd’S Famed Novel, The Secret Life Of1885 Words   |  8 Pages Author Sue Monk Kidd’s famed novel, The Secret Life of Bees, chronicles the story of a young girl Lily in the summer of 1964, as she escapes her abusive and dreadful past to find love and acceptance among a group of eccentric African American beekeepers. The novel centers around one of the most racially divided periods to occur since the Civil War, and shows how it affected not only African Americans, but young, impressionable white children like Lily. The author addresses the inhumanity of racism

Gretel by Andrea Budy Analysis free essay sample

â€Å"A woman is born to this: sift, measure, mix, roll thin. † These starting words of the poem Gretel by Andrea Hollander Budy already show the imprisonment of women within a certain standard set by society. These words basically tell us that a woman has no choice on which path to take in her life because she is already born to something. This idea of women, along with prostitution, is what is being shown in the poem. Gretel, though modified, from the children’s tale Hansel and Gretel serves as the exemplary figure. This poem shows ideas about prostitution, and how women will always be caged in the standards set upon them no matter how hard they try to escape. The she in the poem refers to Gretel, but older than her character in the original story. Though it is not explicitly stated that it is Gretel, the poem’s title gave it away and the she does certain things that are relatable to what happened in the original Hansel and Gretel story such as the dropping of crumbs, the woman seizing the brother, and the mentioning of the oven. We will write a custom essay sample on Gretel by Andrea Budy Analysis or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page The speaker, on the other hand, seems to be a third person close to Gretel who sees the events that happened in the poem. This speaker, though, is most probably a woman because it is as if she sympathizes with Gretel. She has enough knowledge of what Gretel is going through. Also, it seems as if the speaker knows Gretel well enough since the speaker has witnessed Gretel growing up (Gretel learning the dough until it folds into her skin, Gretel trying to lose it, Gretel beginning the long walk, etc. ). In the original Hansel and Gretel story, it was Hansel who was doing most of the work and decisions to make them both survive and find their way back to their father’s house. He was the one who dropped the trail of stone pebbles and crumbs; the one who was always comforting Gretel; and even when they found the witch’s house, he ordered Gretel which parts of the house she is going to eat. Being the older brother, he was the more responsible of the two siblings while Gretel was the submissive one. It was only in the latter part that Gretel started to take over. She was witty enough to outsmart the witch, save them both, look for a way to cross the river, and find their way back to their father’s home. This characteristic of Gretel from the original story is what motivated her to become what she is in Andrea Budy’s poem. With the same wit and capabilities, she tried to escape from living in a certain standard set upon her. The poem can also show ideas about prostitution. This is evident in the lines â€Å"she learns the dough until it folds into her skin†, â€Å"she empties her dark pockets, dropping enough crumbs to feed all the men who have ever touched her or wished†, and â€Å"remember something of his touch†. This can mean that the â€Å"crumbs† or â€Å"dough† talks about her flesh/body because in the line â€Å"she learns the dough until it folds into her skin and there is no difference†, it tells the reader that there is eventually no difference between the dough and her skin. But she also tries to lose the idea of being a prostitute, but without success, as evident in the line â€Å"Much later she tries to lose it. Makes bets with herself and wins enough without trying†. Her trying to lose herself as a prostitute is also figuratively portrayed when she was â€Å"emptying her dark pockets† and â€Å"dropping enough crumbs to feed all the men who have ever touched her or wished. In the last part of the poem, it was stated that she was almost transparent and thin when she reached the clearing, and that is why the old woman only seized the brother. This shows that Gretel already has no more use after she has escaped her dark past (and what was expected of her) as a prostitute. The old woman may figuratively refer to society itself (she did not seize/choose Gretel because she was not good enough). Again, this shows women being caged in a certain standard set upon them, and have no more value once they escape from this cage. The poem ends with Gretel not escaping the oven, eating the crumbs meant for him, and remembering something of his touch. The â€Å"his† in this part of the poem does not necessarily talk about Hansel. This may refer to all the guys who have touched her before. Gretel â€Å"won’t escape that oven† shows that Gretel chooses this path, which is probably death, rather than going back to her old life. This is probably a choice made by Gretel because the word used is â€Å"won’t†, which supports an action made by will (as oppose to â€Å"can’t†, which supports an action that is not motivated by a choice). Lastly, the line â€Å"she’ll eat the crumbs meant for him, remember something of his touch, reach for the sifter and the cup† probably talks about Gretel’s last thoughts inside the oven. She is kind of bringing with her the memories she had in the past as she is about to face her escape/death. Indeed, this poem generally talks about Gretel and her double as a prostitute; the imprisonment of women into a certain standard set by society; and Gretel’s rebellious act against this societal imprisonment.

“Catcher in the Rye” and “Rebel without a cause” Essay Essay Example

â€Å"Catcher in the Rye† and â€Å"Rebel without a cause† Essay Paper When one both reads Catcher in the Rye and sees Rebel Without a Cause. he or she can’t aid but inquire if the authors. Nicholas Ray and J. D. Salinger. someway knew each other. or if one author copied the thoughts of the other. Jim Stark and Holden Caulfield. the two chief characters of the narratives. have so much in common that if they of all time met one another. they would instantly go friends. The chief subject that applies to both plants is adolescent rebellion. Holden and Jim seem to acquire into problem frequently. which affects many different facets of their lives. including their friends. household. school. location. and self-image. We will write a custom essay sample on â€Å"Catcher in the Rye† and â€Å"Rebel without a cause† Essay specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on â€Å"Catcher in the Rye† and â€Å"Rebel without a cause† Essay specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on â€Å"Catcher in the Rye† and â€Å"Rebel without a cause† Essay specifically for you FOR ONLY $16.38 $13.9/page Hire Writer Holden’s and Jim’s parents have really similar attitudes towards their kids. They both appear to botch their kids indefinitely. a common show of parents during the 1950’s. Jim’s male parent mentioned that he bought Jim everything he wants. including a auto and bike. Holden said that his female parent had late sent ice skates to his school for him. Besides. both parents show embarrassment of their children’s delinquent behaviour. Neither Jim’s nor Holden’s male parents are good function theoretical accounts for their boies. Jim feels that his male parent is cowardly. weak. and a poulet. Holden’s male parent isn’t of all time about. since Holden is ever at one get oning school or another. Furthermore. both boies feel misunderstood by their parents. The major difference between Holden’s and Jim’s households is that Holden’s parents trade with his jobs by directing him off to prep schools. whereas Jim’s parents seek to be more involved in their son’s life and travel with him from town to town. A minor difference in their households is that Jim is an lone kid. but Holden has three siblings. Holden does non truly hold any friends. He invariably criticizes and complains about the people he interacts with. seldom has anything positive to state about them. and does non see anyone his existent friend. Jim tries to do friends with the childs at his new school. but merely succeeds in deriving two existent 1s. Plato. who is a societal castaway at school. leaps at the opportunity to go Jim’s friend. Judy. nevertheless. makes merriment of Jim with her friends until her fellow. Buzz. is killed. Then. she seeks comfort in Jim and they fall in love. Both the Jim and Holden feel like castawaies. which is a major portion of their rebellion. However. where Jim tries to suit in and is rejected by his equals. Holden does non do such efforts and he is the 1 who rejects his schoolmates. Neither Holden nor Jim fit into their schools. Holden has a batch of academic jobs. although he appears to be a reasonably intelligent male child. Jim. on the other manus. has societal jobs. In his old schools. he had a inclination to crush up childs for naming him poulet. He besides feels the demand to maintain his award. and hence take part in the â€Å"chickie fight† against Buzz. which leads to Buzz’s decease. Holden seems to set in really small to no attempt in his school assignment and adjustment in. He doesn’t truly care that he flunks out of his categories. Jim’s academic life wasn’t truly portrayed in the movie. but he did seek to suit in. When he was scolded for walking over the school’s insignia. he felt really regretful about it. Therefore. Jim is non ever deliberately rebellious. but Holden’s rebellion is calculated. Jim’s and Holden’s emotional confusion affect their lives likewise. Both are highly misunderstood by both the populace and their ain households. Although they appear to be rebellious and tough. both have a more sensitive inside. They suffer from disaffection from their households and equals. but Jim decidedly strives towards credence while Holden does non. If Catcher in the Rye had been made into a film. James Dean would hold been the perfect histrion to play the portion of Holden. since his portraiture of Jim was so precise.

Healing Hospital a Daring Paradigm free essay sample

Healthcare providers need to reach people on a personal level. The concept of the healing hospital paradigm research reveals that specific design changes in healthcare environments can reduce patient stress and alleviate the consequences of that stress. These changes can also help reduce medical errors and hospital-acquired infections, while improving staff morale and efficiency (Kreitzer, 2011). This paper will identify the concepts of a healing hospital, advances in technology, the physical design of the hospital and culture which promote a holistic approach to patient care. Physical Environment The healing environment goes beyond just the basic construction materials that make up the hospital. An actual healing environment is constructed to help patients and families cope with the stresses of illness, and are free from overhead paging, in-room intercoms, loud machines or noise at the nurses station (Eberst, 2008). Hospitals need to be free from physical disturbances which can cause stress for the patient and their family. We will write a custom essay sample on Healing Hospital: a Daring Paradigm or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Many hospitals are under constant construction. The loud noise of this construction can inhibit healing. Healthcare providers need to be sensitive to this and be patient advocates to ensure that the construction noises are at times when the patient is not in a resting state. They can coordinate construction times during optimal patient awake times. This will allow patients with adequate rest periods to promote healing. Patients need internal transformation to completely heal. Human aura is an expression of what is taking place within the mind, the soul, and the spirit of the individual. When considering this the color of the environment plays a big part of the healing environment. The use of chromotherapy, color healing, is essential when considering a healing environment. Green is considered the universal color for healing (Stefanidakis, 2001). Using colors appropriately in the hospital environment can encourage emotional responses to enhance healing. If the incorrect colors are utilized the patient may present with symptoms of irritability instead of peacefulness or cheerfulness which could inhibit healing. Furthermore, the hospitals interior plays a major role in the healing process. Spirituality will be promoted if the interior reflects the hint of a religious atmosphere such as exercising specific religious artifacts spirituality will be promoted. Hospitals can also incorporate unrestricted visiting, decorative fountains, fireplaces, skylights and healing gardens to help provide a relaxing environment which decreases stress for their customer population. Technology Technology can help provide an overall healing environment. Medical advances in medicine and diagnostic procedures help provide treatment for the physical illness. Historically physicians treat physical illnesses, psychiatrists treat mental illnesses and hospital chaplains deal with spiritual issues. Many times the physicial treatment of illness is the main focus of hospital staff. However, technology can also provide a way of better communication between staff and physicians with the use of cell phones. Wireless monitoring systems and alarm silence mechanisms can provide a quieter, calmer environment with less patient stress which promotes a healing environment. Although technology helps promote the healing of physical illness patient satisfaction can be improved when a holistic approach is taken. The healing hospital incorporates technology and holistic patient care to provide body, mind and spiritual healing (Chapman, 2007). Spiritual Healing Spirituality is the search to know our true selves and discovering the real nature of consciousness (Russell, 2006). Many times healthcare providers think of patients based on their diagnosis. This thought process depersonalizes the patient. This can lead to care that is not holistic. Healing hospitals promote staff education and administrative support to provide patients with holistic care. If staff members enter patient rooms in a calm and unhurried manner the patient perceives this as a loving environment (Chapman, 2007). This approach to each patient encounter allows the staff to address all of the patient needs. In this situation patients will open up to the staff so that all patient needs are identified. The staff can then recognize these needs and utilize all available resources to aid the patient in the healing process. Spirituality plays a major role in the patient’s ability to cope with stress and illness (Ashcraft, Anthony Mancuso, 2010). Biblical Passage In times of illness people turn to their faith and pray for help. The bible states â€Å"The LORD sustains them on their sickbed and restores them from their bed of illness† (Psalm 41:3, New International Version). This reinforces the healing the concept of the healing hospital and the power of prayer. Prayer is one of the most helpful ways of inspiring hope in our patients and families. This passage reinforces the belief that spirituality is essential in the healing process. As healthcare providers we must be sensitive to our patient’s spirituality and incorporate this in our patient care. This is a paramount of the healing hospital paradigm. Incorporating spiritual healing provides holistic care that is essential in the restoration of health. Culture The concept of the healing hospital is gaining the attention of healthcare professionals when they consider holistic care. It is essential that hospital administrators as well as the staff embrace this concept to achieve holistic patient care. If everyone is not on the same page, holistic care cannot be achieved. Many times administrators are dollar focused. In this process they lose site of the aspect of holistic care. Many hospitals struggle financially and in a knee-jerk reaction jobs are eliminated. This often results in fewer nurses with larger patient loads. It also results in increased work demands of other employees. Cutting corners to save dollars affects all aspects of patient care. Patients often feel like a number or diagnosis and the personal aspect is lost. Patients’ emotional and spiritual needs are not met. How can hospital employees produce a healing atmosphere and provide holistic care to their patients with these obstacles? Holistic care can only be achieved in a loving, caring environment (Chapman, 2007). This atmosphere will produce better patient satisfaction scores and enhanced revenue for success. This also provides employee satisfaction which promotes better patient care. These concepts go hand in hand. The healing hospital implements processes based on subjective theories as well as scientific evidence based practices to promote all aspects of healing. Conclusion The healing hospital paradigm concept encompasses an all-inclusive treatment to meet patients’ needs for complete restoration. The components of this theory are a culture of loving care, a healing environment and technology with a combined work design.

Free Essays on Strong Writing From An Even Stronger Man

â€Å"Strong Writing from an Even Stronger Man† Martin Luther King Jr’s letter from Birmingham jail has proven to be a perfect example of effective and persuasive writing. There are many techniques which he used including: repetition of important and sometimes disturbing statements, including issues that most people don’t want to talk about, and using quotes from many honored people in American history. Some of the people he used quotes from included: Jesus, Amos, Martin Luther, and Abraham Lincoln. Early on in the letter King describes the issue of tension in society (679). He explains that he opposes violent tension but sees constructive, nonviolent tension as necessary for growth (679). He goes on to say that â€Å"Socrates felt that it was necessary to create a tension in the mind so that individuals could rise from the bondage of myths and half-truths to the unfettered rb bealm of creative analysis and objective appraisal, so must we see the need for nonviolent gadflies to create the kind of tensions in society that will help men rise from the dark depths of prejudice and racism to the majestic heights of understanding brotherhood† (679). This is a way he proves to the clergymen that he does not condone violent tension or agree with it. Instead he tells them he sees only nonviolent tension as constructive and good (679). By saying this, he shows that he will not agree or tolerate violence in any way. By adding what Socrates says, he backs up the idea that witho ut te! nsion no one will test what he or she hears. All people will do is listen to what others tell them and believe it as truth, without ever questioning the issues for themselves. Tension allows people to see other sides of issues and repute them, this way they are able to hear different sides of issues and eventually come to their own opinions on them. (682). Further along in the letter he includes a section that is crucial to the statement he is ... Free Essays on Strong Writing From An Even Stronger Man Free Essays on Strong Writing From An Even Stronger Man â€Å"Strong Writing from an Even Stronger Man† Martin Luther King Jr’s letter from Birmingham jail has proven to be a perfect example of effective and persuasive writing. There are many techniques which he used including: repetition of important and sometimes disturbing statements, including issues that most people don’t want to talk about, and using quotes from many honored people in American history. Some of the people he used quotes from included: Jesus, Amos, Martin Luther, and Abraham Lincoln. Early on in the letter King describes the issue of tension in society (679). He explains that he opposes violent tension but sees constructive, nonviolent tension as necessary for growth (679). He goes on to say that â€Å"Socrates felt that it was necessary to create a tension in the mind so that individuals could rise from the bondage of myths and half-truths to the unfettered rb bealm of creative analysis and objective appraisal, so must we see the need for nonviolent gadflies to create the kind of tensions in society that will help men rise from the dark depths of prejudice and racism to the majestic heights of understanding brotherhood† (679). This is a way he proves to the clergymen that he does not condone violent tension or agree with it. Instead he tells them he sees only nonviolent tension as constructive and good (679). By saying this, he shows that he will not agree or tolerate violence in any way. By adding what Socrates says, he backs up the idea that witho ut te! nsion no one will test what he or she hears. All people will do is listen to what others tell them and believe it as truth, without ever questioning the issues for themselves. Tension allows people to see other sides of issues and repute them, this way they are able to hear different sides of issues and eventually come to their own opinions on them. (682). Further along in the letter he includes a section that is crucial to the statement he is ...

Ethical boundaries of undercover policing and authorized criminality Essay - 1

Ethical boundaries of undercover policing and authorized criminality - Essay Example of concession once the fellow group discovers about it ( Sullivan, 2005 ) .Again, engaging in a situation whereby it would involve revolutionary offenses and commission of executing since this would be against the legal framework of police laws and this would deny me the trust from the public at large ( Kephart, 2007 ). Also, engaging in an activity that involves drug rewards to the clunk, since it puts one in a position of conflicting judgment as a law enforcer. I would ensure my authorized criminality included the following: â€Å"Buy-bust†: this involves making orders for the drugs and using the marked money to purchase the drugs. The covert police then flees from the scene which opens an opportunity for the plain clothed police to swoop in and detain the supplier. Then the confiscated cash is used as evidence that the deal had indeed taken place ( Sullivan, 2005

Population Growth and Its Effect on Global Warming Research Paper

Population Growth and Its Effect on Global Warming - Research Paper Example , this brief essay will attempt to briefly analyze this monolithic problem in terms of the exponential growth in human population that has been evidenced over the past 200 years. Furthermore, a determination will be sought to be made with regards to the question of whether human action or natural causes best explain the climate fluctuations that planet earth has recently been chronicling. Lastly, as a function of the previous points of discussion and analysis, the author will attempt to proscribe a reasonable and performable set of steps and solutions which both the scientific community and the world at large could and should seek to employ as a function of ameliorating the stress on planet earth and the issues at hand. Furthermore, as a means of bringing such an understanding about, the analysis will also rely upon relevant scientific publications on the topic as well as verifiable statistics and charts concerning overall levels of climate change and corresponding increases in CO2 e missions by humans over the past several decades. However, noting the global climate change is an issue is not, in and of itself sufficient. As such, the analysis will also consider the rapidly increasing demand that fossil fuels have been projected to assume over the next several decades and posit a potential alternative to further environmental degredation at the hands of seemingly ever expanding human populations. Firstly, there is the point of view that strongly believes that the swings in climate change are the direct result of the presence of high amounts of human CO2 in the atmosphere that is causing a greenhouse effect on the planet and thereby causing world temperatures to rise. Prima fascia of this argument is the belief that human CO2 emissions are responsible for the changes to the global climate. It follows therefore that those which ascribe to this point of view are the most vehement that drastic and immediate changes to the manner in which human beings interact

Innovative Idea for a New Product, namely the Round Umbrellas Essay

Innovative Idea for a New Product, namely the Round Umbrellas - Essay Example For this reason, I chose to come up with a new product on umbrellas that are consumer friendly both in price and in its use. The umbrellas will help minimize the issue of umbrellas being prone to damages both during storms and also in high winds. The umbrellas will be aerodynamic wind-resistant designed that will ensure that the umbrella will not overturn during heavy winds. The umbrella will also be extra reinforced rib constructed to ensure that they are firm enough to withstand storms and wind. The umbrellas will be designed in different sizes; big to serve many people in a place, relatively small for few individual and also for one person. The umbrellas are designed such that one will not be wet on trousers and even hands, unlike the other umbrellas. The umbrella will use less expensive materials like anodized aluminum, its configuration is manual and has 5 -6 ribs that make it's cheaper but still strong to withstand storms. For this business, the business structure that best suits it is partnership structure. A partnership involves two or more agree to start a business and run it jointly. The partnership will work well for this innovation since it has few formalities needed, and there is a partnership deed that regulates the operations of the business. With the partnership, there is shared management control and task sharing that reduces the workload for one person. The partners may also take part in their areas of specialization where they are best skilled ensuring that the business runs so well. Partnership venture also limits the chances of one bearing the losses that one may incur alone since they are shared among the partners hence; it makes it attractive to many businesses. Having the issue of loss sharing every partner will work keenly to reduce possible chances of incurring losses in the market, and so the business runs efficiently to gain profits. To establish a venture,  it all begins with d eveloping some ideas. In this stage, researchers are more involved.  

Finite Element Analysis And Analytical Method

Finite Element Analysis And Analytical Method Stone columns are widely used as a ground improvement technique especially in construction of shallow foundations. The main concern in the application of stone columns rely on how well it performs, which involves reducing the overall settlement of the stone column. This project mainly investigates the comparison and contrast between finite element analysis and analytical method in modelling stone columns, whereby settlements of the stone columns are checked whether it is consistent. Finite element analyses were carried out by axisymmetric modelling of the stone column using 15-noded triangular elements with the software package PLAXIS. A drained analysis was conducted using Mohr-Coulombs criterion for soft clay, stones and sand. Analytical data used to compare the settlement was found according to the design method published by Heinz J. Priebe (1995). Both methods were compared by varying parameters such as modulus of deformation of the column to sand ratio, area ratio, stress, diameter, and friction angle of stone column that signifies different soil conditions. It is challenging to find a site with acceptable ground conditions for construction of structures such as buildings, bridges, etc. Often the bearing capacity of the soil would not be sufficient to support the loads of the structures nor would it be in a workable condition for the employees to build the structure. The need for the use of such land with weak cohesive soil strata has been a challenge for design engineers. Although the design of piles foundation can meet all the design necessities, extensive lengths of piles needed eventually results in vast increase of cost of the overall project. Therefore, it is a necessity that the ground conditions must be improved to allow the buildings and heavy construction. A number of ground improvement techniques have been developed over the past fifty years. Main concern of these techniques includes creating stiff reinforcing elements to the soil mass, which results in a soil that has a higher bearing capacity. Out of the various techniques available for ground improvement, the stone column has been widely used. Stone columns (also known as granular columns, granular piles or sand columns) are used to improve soft ground by increasing the load bearing pressure of the soil and reducing settlement of the foundation of structures, embankments, etc. Although these structures are permissible for a relatively large settlement, it is necessary that the settlement be minimized for maximum safety. There have been several ways for installing stone columns depending on the design, local practice and availability of equipment. Among which, the most general methods are the vibro-replacement method and vibro-displacement or vibro-compaction methods. Vibro-replacement technique of stone column is a process whereby large sized columns of compacted coarse aggregates are installed through the weak soil by means of special in-depth vibrators. This can be carried out either with the dry or wet process. In the dry process, a hole of desired depth is drilled down in to the ground by jetting a vibroflot. Upon extraction of the vibroflot, the borehole must be able to stand open. The densification of the soil will be a result of the vibrator near the bottom of the vibroflot. In the wet process, the vibroflot will form a borehole that is of larger diameter than the vibrator and it requires continuous supply of water. As a result the uncased hole is flushed out and filled with granular soil. Th e main difference between wet and dry process is the absence of continuous jetting water during the initial formation of the borehole in the dry process. The performance of the stone columns is not measurable by simple investigations. However, analytically, the efficiency of this composite system that consists of stone column and soil interactions can be assessed by separate consideration of significant parameters as proposed by Priebe (1995) [1]. Stone column technique has proven successful in improving many applications. Such applications include slope stability of both natural slopes and embankments. Construction of such embankments can commence immediately after the installation of stone columns (Vibro Stone Columns, 2009) [2]. Other advantages include increasing bearing capacity of ground, reducing total and differential settlements, reducing the liquefaction potential of sands. The main disadvantage of the stone column technique is its ability to induce bulging failure on the upper part of the stone column. In-situ field tests (cone penetration test and full scale footing test) before construction and after construction of stone columns have shown significant improvements in the soil (J. T. Blackburn, J. K. Cavey, K. C. Wikar, and M. R. Demcsak., 2010) [3]. In a study of the behaviour of stone columns, (Mitchell J.K., and Huber T.K., 1985) [4], by using finite element analysis, had proved that the installation of stone columns leads to a 30-40% reduction in settlement of the values expected that of an untreated ground. 1.2 Objectives The main objective of this project is to show that the analytical method used to design stone columns and the finite element method used to model the stone column numerically, has comparable total and differential settlement. The analysis also provide the understanding of the influence on settlement by varying parameters such as modulus of deformation of the column to sand ratio (Ec/Es), Area ratio (Ac/A), stress à Ã†â€™0, diameter D, and friction angle of stone column ÃŽÂ ¦c, and finally comparing them against the Priebe analytical approach. The objectives of the project are to: study the existing analytical and numerical theories related to stone column modelling develop an axisymmetric simulation of the stone columns by using finite element method, and compare the settlement difference with the analytical results by altering various parameters related to settlement change. This project uses the finite element software package PLAXIS to simulate the stone column numerically and the design method proposed by Heinz J. Priebe (1995) [1] for the analytical results. 1.3 Organization of the research paper In addition to the abstract, list of figures and notation, acknowledgement, and table of contents, this dissertation is divided to six chapters: The first chapter consists of introduction and background of stone columns where it briefly summarizes the installation methods, some of the advantages and disadvantages of the stone columns. The second chapter describes the study of existing analytical and numerical theories regarding modelling stone columns. In this chapter, other than the main findings from the theories, the full procedure of Priebe (1995) method of modelling stone column has been reviewed. Third chapter describes how the stone column was modelled using the PLAXIS software, including the assumptions made and technical data used in different models. The fourth chapter shows the results obtained from the analysis compared to the analytical method proposed by Priebe (1995). The results are presented using necessary graphs and charts. The fifth chapter includes the conclusion of the project and provides recommendations for further studying. The final chapter lists out the references used in this project. The Appendix contains documents such as the Risk Assessment, Diary of the work progress, and the any additional tables and figures of the analysis. CHAPTER TWO 2. LITERATURE REVIEW Many researchers in this field have made their effortless contribution studying the behaviour of stone columns numerically and analytically. Most of the numerical analyses were conducted using finite element analysis, whereas analytical method is derived from a series of equations. Some of the main findings from researchers related to this study are reviewed below. 2.1 Analytical Models 2.1.1 Alamgir, Miura, Poorooshasb, and Madhav, (1996) Alamgir et al. (1995) proposed a simple theoretical approach to evaluate the deformation behaviour of uniformly loaded ground reinforced by columnar inclusions. The displacements of the soil and stone columns are obtained by considering the elastic deformation of both soil and column. A typical column-reinforced ground and column soil unit (Fig. 2.1) where the column is considered to be cylinder, of height H and diameter of dc (=2a where a is the radius) The deformation at a cross section within the column, wcz, is assumed to be constant throughout whereas the deformation of the surrounding soil, wrz, increases from the soil column surface towards the outer boundary of the unit cell (Fig. 2.2). This denotes that since the column soil interface is elastic and no slip occurs, the displacements of the soil and the column at interface can be assumed to be equal. The deformation of the surrounding ground, wrz, is assumed to follow: where wrz is the displacement of the soil element at a depth z and at a radial distance r, wcz is the displacement of the column element at a depth z, ÃŽÂ ±cz and ÃŽÂ ²c are the displacement parameters, a and b are the radii of column and unit cell, respectively, r is the radial distance measured from the center of the column. The column and the surrounding soil were discretized in to a number of elements as shown in Fig. 2.3. The interaction shear stresses and stresses on the column and the soil were obtained by using equilibrium of vertical forces within the medium (Fig. 2.4). Successively the displacement of the column and soil were obtained by solving equations by applying the linear deformation characteristics of the soil. Therefore, the deformation of the jth element of the column, Wcj was obtained as: where à ¢Ã‹â€ Ã¢â‚¬  H is the height of a single element, Es and Ec are the modulus of deformations of soil and column material respectively, vs is the Poissons ratio of the soil, and à Ã†â€™cj is the normal stress acting at the top of the jth element of the column. Due to the symmetry of load and geometry, the shear stress at the outside boundary of the unit cell is zero, which subsequently leads to an equation for ÃŽÂ ²c Furthermore, the compression of the soil element adjacent to the boundary of unit cell (N,jth element of the soil), wsNj was derived as: where à Ã†â€™sNj is the normal stress acting at the top of the element, n is the spacing ratio b/a, à ¢Ã‹â€ Ã¢â‚¬  R is à ¢Ã‹â€ Ã¢â‚¬  r/a and à ¢Ã‹â€ Ã¢â‚¬  r is (b-a)/n. By using the displacement compatibility and substituting r/a=n-à ¢Ã‹â€ Ã¢â‚¬  R/2, Eq. [2.1] can be written as: Finally, solving the equations 2.2, 2.3, 2.4, and 2.5 can lead to the displacement parameter The settlement profiles, the shear stress distribution, and the load sharing from the above mention method was compared against a simple finite element analysis as shown in Fig. 2.5, Fig. 2.6, and Fig. 2.7. It is seen that the results obtained shows a reasonable agreement between the two methods and can be used as a useful method to determine the settlement of the stone columns. 2.1.2 Priebe (1995) Priebe (1995) proposed a design method to assess the behaviour of stone columns that uses an improvement factor which stone columns improve the performance of the subsoil in comparisons to the state without columns. The above statement was best described using the following relationship: According to this improvement factor, the deformation modulus of the composite system is increased respectively settlements are reduced. A unit cell of area A is considered which consists of a single column with the cross section area Ac. Calculation of the improvement factor was done by assuming that: The stone column to be of incompressible material The stone column is installed within a rigid layer The bulk densities of the stone column and soil are also neglected. Hence, according to Priebes approach, column cannot fail in end bearing and any settlement of the load area results in a bulging of the column, which remains constant all over its length. The improvement of a soil achieved by the presence of stone columns is evaluated based on the assumption that the column material shears from the beginning whilst the surrounding soil reacts elastically. Additionally, the coefficient of earth pressure amounts to K=1 by assuming that the soil to be displaced already during the column installation to such a degree that its preliminary resistance corresponds to the liquid state. Using the above criterion the basic improvement factor n0 is expressed as: where = Improvement factor Ac = Area of the stone column A = Grid area of the single unit = Poissons ratio = Coefficient of active earth pressure for the stone column material = Friction angle of the stone column material Since a Poissons ratio of 1/3 is adequate for the state of final settlement in most cases, the results of the evaluation is expressed as basic improvement factor n0 and substituting 1/3 as Poissons ratio, which leads to the following equation. The relation between the improvement factor n0, the area ratio A/Ac and the friction angle of the backfill material is illustrated in figure 2.8 below. The compacted backfill material of the stone column is still compressible. Due to this reason, applied load of any amount will lead to settlements that are unconnected with bulging of the columns. Subsequently, compressibility of the column is integrated by adding up an additional area ratio (A/Ac) as a function of the constrained moduli of the columns and soil Dc/Ds and is provided in the Fig. 2.9. The improvement factor as a result of the consideration of the column compressibility is represented by n1, as shown in the equation: where and Furthermore, for =1/3 can be found using the equation below The additional loads due to the bulk densities of the soil and columns decrease the pressure difference asymptotically and reduce the bulging correspondingly. Subsequently, multiplying the basic improvement factor by a depth factor could incorporate the effect of the bulk density, which is given by: where, fd = Depth factor K0C = Coefficient of earth pressure at rest for stone column material = Bulk density of the soil = Layer thickness Pc = Pressure within the column along the depth Figure 2.10 shows the influence factor y as a function of the Area ratio A/Ac and can be used to approximate the depth factor. The figure considers the same bulk density for the columns and soil, which may not be true in most cases. Therefore as a safety measure, the lower value of the soil should be always considered. Using the above depth factor fd, a more enhanced improvement factor can be defined that considers the effects of the overburden pressure, and therefore is represented by n2 where it can be related by the following equation: The depth factor is limited so that the settlement of the columns resulting from their inherent compressibility does not exceed the settlement of the composite system. This is because as the depth increases, the support by the soil reaches such an extent that the column do not bulge anymore. The first compatibility control where the depth factor is limited is applied when the existing soil is stiff or dense and is given by: The second compatibility control is required since should not be considered even if it may result from the calculation. This second control relates to the maximum value of the improvement factor nmax and is applied when the existing soil is loose or soft. Both compatibility controls can be determined using figure 2.11 below. Finally, the total settlement of a single or a strip footing can be assessed using the above series of equations. The design results from the performance of an unlimited column grid below an unlimited load area. For the unimproved ground, the settlement can be found using the equation: where, sà ¢Ã‹â€ Ã… ¾ = Total settlement p = Pressure exerted by the above structure d = Depth of the stone column Ds = Constrained modulus of the soil Similarly, the total settlement of the improved ground, where the improvement factor is incorporated, can be found by dividing the settlement by n2, which is shown below: This method is one of the most common and well-known method of designing stone columns and has been widely used all over the world because of its simplicity. Moreover, in comparison with the other methods, it shows a much wider behaviour of the stone column by assuming the stone column and surrounding soil as a composite system. 2.2 Numerical Models 2.2.1 A.P. Ambily and Shailesh R. Gandhi (2007) Ambily and Shailesh (2007) studied the behaviour of stone columns by comparing experimental and Finite Element analysis on a single stone column and a group of 7 columns. Laboratory experiments were carried out on a stone column of 100mm diameter surrounded by soft clay in cylindrical tanks of 500mm high with diameter varying from 210 to 420 mm for a single column test and from 210 835 mm for a group of 7 columns. This represents the required unit cell area of soft clay around each stone column. Pressure cells attached to the loading plate were used to measure the stress intensity of the column and the soil as shown in figures 2.12 and 2.13. Furthermore, it is also assumed the stone columns are installed in a triangular pattern. The load deformation behaviour of the column/treated soil was studied by applying vertical load for both cases; column only loading and entire area loading, and observed for equal intervals of settlements until failure occurs. After a series of procedure, the shapes of the tested columns are obtained. It is clearly seen in Fig. 2.14 that bulging mode of failure only occurs in the case of column alone loaded, and not in the case of entire area loaded. Finite Element analysis was conducted using 15-noded triangular elements with the software package PLAXIS, to compare the load-settlement behaviour with the model test and the laboratory experiment. The analysis was carried out using a stone column of diameter 25 mm and 225 mm high, which was made at the center of the clay bed and loaded with a plate of diameter two times the diameter of the stone column. The axisymmetric finite element mesh to represent the single stone column and the group of stone columns are shown in Fig. 2.15 and Fig. 2.16 respectively. Likewise the laboratory experiment, finite element analyses were done for column alone loaded and entire area loaded case for s/d=3. The results of these simulations (Fig. 2.17) shows that failure by bulging occurs in column alone loaded case, which also agrees with the results from laboratory experiment. The comparison of the experimental results and finite element analysis data shows significant consistency in both methods. The comparisons made by A.P. Ambily and Shailesh R. Gandhi include the effect of shear strength, Cu (Fig. 2.18) and the effect of s/d (Fig. 2.19) on the behaviour of stone columns. Additionally, the effect of surcharge on stress settlement behaviour (Fig. 2.20) and effect of s/d and ÃŽÂ ¦ on the stiffness improvement factor (Fig. 2.21) was compared between both methods. These tests have also shown similar behaviour. The stiffness improvement factor (ÃŽÂ ²) was calculated as the ratio of the stiffness of treated and untreated ground, and beyond s/d = 3, it shows no significant improvement. The analysis was extended to study the effect of the angle of internal friction of stones by varying the ÃŽÂ ¦ as 35, 40, 43, and 45o for varying values of s/d ranging from 1.5 4. From the results shown in Fig. 2.22, it is confirmed that this relationship is valid for any shear strength values of surrounding soil. Furthermore, the comparisons between a single column and group of 7 columns were found as in Fig. 2.23. Both experimental and finite element method results reveal comparable behaviour regarding the ultimate load and load deformation relationship. To ensure that this proposed design method agrees with the existing theories, this study was compared with the existing theories as shown in Fig. 2.24 and Fig. 2.25. The result shows a slightly higher stiffness improvement factor (ÃŽÂ ²) for an area ratio more than 4 and a lower value for an area ratio less than 4 compared to Priebe (1995). 2.3 Summary The studies mentioned above show comparable results and have been adopted by many engineers and contractors. However, not many researchers had compared Priebes analytical model with finite element method. Therefore, the finite element analysis carried out in this project will be compared to the design method proposed by Priebe (1995), since it gives a much broader overview of the composite system consisting of the stone column and soil interactions and moreover it is the most common and improved analytical method used by the design engineers around the globe. CHAPTER THREE 3. METHODOLOGY 3.1 Introduction Different methods of modelling stone columns numerically have been implemented in the past. Among those, the most simplest and common type of numerical modelling is using finite element method. In fact, studies have shown that the settlements predicted from the finite element analysis shows comparable results that of the values gained from actual field tests (Kirsch, F. 2009). Numerical calculations are usually complex and most of the time is impossible to conduct without means of dedicated software. Likewise, in this research project, PLAXIS software is used to carry out the finite element analyses. 3.2 PLAXIS software The main computer software used in this investigative project is PLAXIS Professional Version 8.2. PLAXIS is a comprehensive package for finite element analyses for geotechnical applications. It allows simulating the soil behaviour by using soil models. The software employs a graphical user interface that makes it simple to use and also provide the ability to input the necessary parameters such as different soil layers, structural elements, variety of loadings, and boundary conditions through CAD drawing procedures. It allows discretizing the soil component into either 6-noded or 15-noded triangular elements whereby 15-noded triangles provides high stress results for complex problems. The software also allows automatic generation of 2D finite element meshes that can be further refined according to the choice of analysis. In addition to that, the software comes with a very useful feature named Staged Construction. This feature allows the models to be simulated at different stages by ac tivating and deactivating clusters of elements, application of loads, etc. One of the advantages of this software is the ability to generate the results quickly with minimum errors. The output results include values for stresses, strains, settlements, and structural forces together with the plots of different curves such as, load-displacement curve, stress-strain diagrams, and time-settlement curve. 3.3 Finite Element Modelling Finite element analysis was conducted to compare the load-settlement behaviour of the stone column. A two dimensional axisymmetric analysis was carried out since the investigation concerns a single unit of stone column using Mohr-Coulombs criterion for clay and stone column. 15-noded discretization was used for more precise results. The initial vertical stress due to gravity has been considered in this analysis. Similarly, the stress due to column installation, which often depends on the method of construction, is also considered in this analysis. Assumptions made in the finite element modelling: The soil is assumed to be homogenous, infinite and behaves as Mohr-Coulomb model. The ground water table is at the same level as the stone column and clay layer, meaning the stone column and clay layer is submerged in the water. Hence, effect of ground water condition should be taken into account. The base of the clay layer is rigid, i.e., full fixity at the base of the geometry (ux=0, uy=0) and roller conditions at the vertical sides (ux=0, uy=free) boundary conditions are shown in Figure 3.1(a). Assumed that deformation of the column is mainly by radial bulging and no significant shear is possible. Therefore, interface element between stone column and clay has not been used. Mitchell, J. K., and Huber, T. R. (1985) also carried out similar type of finite element analysis without the inclusion of the interface element. 3.4 Geometrical Parameters The dimensions of the PLAXIS model are shown in Figure 3.1(b). H is the height of the column, which varies between 10m, 20m, and 30m. D is the diameter of the stone column, which has a typical value of 1m, in all the models except for the model to check the influence of diameter and spacing. Equivalent diameter De depends on the spacing between stone columns as well as the arrangement pattern of the columns. The value of De was calculated by considering the following Influence Area methods. 3.4.1 Influence Area Methods There are several methods for calculating the equivalent diameter around the stone column, which depends greatly on the spacing, diameter, and pattern of installation of the stone column. Two methods were considered in this investigation. 3.4.1.1 Equivalent Area method The equivalent area method simply equates the area of the grid spacing with that of the cross sectional area of column to find the influence area around the stone column. The following example gives a better understanding of the above statement. Example: Grid spacing of the column = 1.5 X 1.5 meters (square grid) Therefore, Diameter of stone column = Finally, Where, De is the equivalent diameter around the stone column. 3.4.1.2 Unit cell method (Balaam Booker, 1981) Unit cell consists of the column and the surrounding soil within the zone of influence of the column. The unit cell has the same area as the actual domain and its perimeter is shear free and undergoes no lateral displacement. Balaam Booker (1981) relates the diameter of the unit cell to the spacing of the columns as: where, De is the equivalent diameter (for square grid) S is the spacing of the stone column Similarly the different geometrical patterns due to column arrangements are shown in the Figure 3.2. Both methods reviewed above gives relatively similar magnitudes. However, Priebes analytical method concerns more on unit cell area. Hence, for this investigation Equivalent Area method is used to model the influence are in PLAXIS. 3.5 Mesh Refinement Test Mesh generation has a great influence in the accuracy of the model. Generally, the finer the mesh the more accurate the result would be. However, this is not true for every case. Therefore a simple test using PLAXIS was conducted to check the effect of mesh refinement. Initially, mesh generation was set to coarse (around 100 elements), utilized as global coarseness of model. The test was carried out by comparing it with the refined mesh (around 500 elements). Moreover, the mesh is further refined which in PLAXIS is set to very fined (around 1000 elements). The generated meshes are shown in Figure 3.3. followed by the time-displacement graph showing the comparison between coarse, medium, fine and very fine mesh refinements. (Figure 3.4) From the above graph it can be seen that the four curves gives comparable results. However, the coarse, medium, and fine meshes give very similar results compared to the very fine mesh refinement. The objective here was to get the lowest value for the displacement since the improved ground due to the installation of stone column would eventually lead to a reduced settlement. Therefore, the finest mesh refinement gives the most precise result. Even though it takes a substantial amount of time to simulate using the most finest meshing, for this investigation, models had been simulated using the very fine mesh option. 3.6 Input Parameters Varying the soil parameters can alter soil characteristics. Most important outcome by altering these parameters is deformation that leads to settlement. Such parameters that have major impact on settlement includes, material type, spacing of stone columns, diameter of influence area, diameter of stone column, elastic modulus of both column and soil, depth of the soil layer, Poissons ratio for both column material and soil, Unit weights of the materials, cohesion, friction angle, etc. Soil and material properties are shown in Table 3.1. Note that the effective stress cohesion, c of the stone column is given a small nonzero value to avoid numerical complications. The majority of the above parameters are considered for only one type of test model and are varied for different model tests. The varied parameters such as elastic modulus of soil and column, friction angle, spacing between columns and influence area around the stone column are reviewed in the following section. 3.7 Test Models The main objective of this project is comparing both analytical and numerical method using Priebes analytical approach and finite element analysis as numerical solution. This can only be achieved by developing multiple models and simulations to obtain a range of values to compare with, which would lead to a more solid conclusion. Three constitutive models were considered for the representation of the following three cases. A clay layer of 30 m, which has a stone column of height 10 m installed. A clay layer of 30 m, which has a stone column of height 20 m installed. A clay layer of 30 m, which has a stone column of height 30 m installed. Note that 1 and 2 are floating columns that are not extended to bedrock or hard layer, which in stone column installation is a rare case, yet installed occasionally. Each of the above tests was carried out by varying the spacing between columns, which would alter the s/d relationship together with the Ac/A ratio. Further tests were carried out to check the influence of stress à Ã†â€™0, diameter D, modulus of deformation of the column to sand ratio Ec/Es and friction angle of stone column ÃŽÂ ¦c using the third case and compared them against the Priebe analytical approach. The summary of test models is given in the Tables 3.2. All the tests were carried out in 3 stages. Install the stone column: Just after the stone column is installed Apply Load: Just after the load is applied to the column Consolidation: After the consolidation process completed to a minimum pore pressure of 1kPa In the all cases the materials were idealized as the Mohr-Coulomb model with the characteristic linear-elastic-perfectly plastic behaviour and the failure criteria defined by the strength parameters given in tables below. Table 3.2 Summary of Model tests Model Test Description Constants Variables 1 Influence of column height on settlement (case 1, 2, and 3) à Ã†â€™0 = 100 kPa Ac/A = 0.2 ÃŽÂ ¦c = 40o Ec/Es = 20 Heigh

Miracle Gro Lab Report

Miracle Gro Lab: Discussion and Conclusion The purpose of this lab was to determine which concentration of Miracle Gro was ideal for the germination of seeds. I hypothesized that the 1. 25% concentration of Miracle Gro would allow the plant to grow the fastest, unfortunately, my data does not support my hypothesis. According to the information we collected, the amount of concentration with the fastest speed and greatest height of growth was the 0% with plain tap water (control group).Two days after â€Å"planting,† my group measured the seed with the greatest rate of growth: 0% exhibited 2. 5 cm of growth, 1. 25% had 0. 9 cm, 2. 5% showed 1. 2 cm, 3. 75% displayed 0. 8 cm, and 5% had 0. 5cm of growth. As evidenced by the data collected, the height of the sprout decreases as the percent of concentration increases. We checked the growth of our mung bean seeds a second time and we observed the results: 0% exhibited 15 cm of growth showing signs of growth through its stalk, roots, and leaves. The 1. 5% and 2. 5% both grew 2 cm and began sprouting a stalk. The 3. 75% and 5% turned dark brown and appeared to have shrunk which are signs that the seed’s embryo is dead. The data did not match our expected data, because the Miracle Gro had some way prevented the imbibition of the seed which is why the 3. 75% and 5% died. Imbibition is a critical developmental process in seeds and our control group with only water demonstrated the most successful amount of growth. We experienced a number of errors in our experiment.Sources of error were human interaction, inaccurate measurements, and incorrectly handling the seeds and materials. In the future, these problems can be avoided by interfering with the plastic bags that contained the seeds, adding the most accurate amount of solute as possible, or making sure that we don’t crush the seeds or the towel that was inserted in the bag. Ideas for future experimentation would be to plant the seeds outside so that the sun would be used as the light source, testing different plant-growing solutions, and analyze the growth over a longer period of time.Overall, the seeds without the Miracle Gro proved to grow greater than those with added Miracle Gro. Compared to the varying concentrations, the height of growth increased as the percentage of concentration decreased. To apply this experiment to real life, average planters or farmers could be able to grow their plants without any added growth supplements and it’d prove to grow sufficiently, due to the fact that the controlled experiment contained the healthiest growth.

Gmr Case Study: Managing Hr in a Global Environment Essay

I. TERMS OF REFERENCE This report is a case study of GMR International Company, which analyzes the different components and challenges of Human Resources Management faced by GMR in a global environment and through a theoretical review, establishes possible improvement strategies towards the creation of best practices. II. METHODOLOGY This report is part based on the interview held with the HR manager of the company complemented with primary research from books and electronic sources listed at the references and lecture and seminar’s contents. 1. INTRODUCTION In a global market, how companies manage and handle their employees determines a key strategic role that ultimately creates a competitive advantage. Companies operate on an international operational level locating outbreaks in different countries and facing different cultural challenges. â€Å"Managing resourceful humans requires a constant balancing between meeting the human aspirations of the people and meeting the strategic and financial needs of the business.† (Torrington, Hall and Taylor, 2008, p.3) A company through any domestic and internationalization process must identify the basic needs of its employees in relation to their business guidelines, creating a balance between strategic and operational resource management. Businesses are valued for their intellectual capital and are projected by the management of intangible assets The purpose of this report lies in the evaluation of the different variables that a global company such as GMR must study, understand and reflect on its corporate strategy for the optimal development of their global operations, based on a adequate personnel management and the creation of sustainable policies for the management and development of intangible capital. 2. GMR INTERNATIONAL: COUNTRY PROFILE GMR Group is a Bangalore headquartered global infrastructure major with interests in the Airports, Energy, Highways and Urban infrastructure, with its International Headquarters based in London. GMR holds interests, directly and through its part ownership of InterGen, in 15 operating power plants with over 8,800MW of generating capacity. In addition an impressive portfolio of approximately 12,000MW of gas, coal and hydro plants are in various stages of construction and development both in India and internationally. GMR has shareholding interests in 4 international airports (New Delhi International (P) Limited; GMR Hyderabad International Airport; Sabiha Gokcen Airport LTD; GMR Male International Airport Ltd)) handling 40 million passengers p.a and 9 road projects exceeding 700 kms of paved roads. GMR is fully committed to the development of infrastructure assets, and in the past two years has raised over US$ 3 billion for the development of airports and another US$ 2.2 billion for the development of power and infrastructure assets including US$1.1 billion for the acquisition of 50% of InterGen N.V, a global power generator. The Group through the dedicated GMR Varalakshmi Foundation, manned by committed professionals is actively engaged in Education, Health, Hygiene and Sanitation, Empowerment & Livelihoods and Community-Based Programs, reaffirming its grass root presence as change agents of society in the field of Corporate Social Responsibility. 3. RECRUITMENT â€Å"Recruitment is defined as searching for and obtaining potential job candidates in sufficient numbers and quality so that organization can select the most appropriate people to fill its job needs.† (Dowling, Engle and Festing, 2008) â€Å"Recruitment is the discovery of potential applicants for actual or anticipated organizational activities. Two conditions must exist for selection to occur, (1) the organization must have a candidate whom it is willing to employ; (2) the candidate must be willing to accept an employment offer. Recruitment is the process of finding applicants who meet both of these conditions.† (Andrews 1993) â€Å"Organizations do not operate in a vacuum, and recruitment drives are one of the times an organization has direct contact with the outside world. Amongst other factors affecting recruitment, are the framework imposed on legislation and that no organization will want to spend money on unnecessary activities.† (Foot and Hook, 2005) 3.1 Recruitment Strategies There are 4 recruitment strategies, which are defined as such. These are 1. Ethnocentric 2. Polycentric 3. Geocentric] 4. Regiocentric Ethnocentric| Polycentric| Geocentric| Regiocentric| Ethnocentric is a belief in the superiority of one’s own ethnic group. The firm basically believes that parent-country nationals are better qualified and trustworthy than host country nationals.| Polycentric is a belief that local people know the local environment better than outsiders.| Geocentric is the notion that the best people should be employed, regardless of their nationality.| Regiocentric is the variation of staffing policy to suit particular geographic areas.| 1.Based on Paul Coldwell’s seminar slides, 2011. GMR International uses all four of the above-mentioned strategies, depending upon factors mentioned below, * The requirements of the job position to be filled in. * The position of the job in the hierarchy of the firm. If the job were a high position one, they would use the geocentric approach; and if it were for a more junior position, they would probably use a polycentric approach. * They would not like to waste too much time or money on the hunt for the right candidate. * Even when they are looking for a candidate for a high position job, they have certain restrictions to be cautious about from the UK Border Authority and the Government. When using the geocentric approach. E.g. The Head of Airport is an Italian working in South Africa and would report to the UK. Because he was an expert on airports, he was hired for the job. E.g. recently, when trying to bring in a Malaysian to UK, the UK Border Authority refused his sponsorship, so it did not work out. When using the polycentric approach. E.g. When looking for administrative support, GMR looks for local people to do the local jobs, as they would not like to waste the time and money to do a whole UK or EU based search for something small such as skills. 3.2 Challenges for hiring people at GMR International * GMR, as a brand, is not that well known in the UK and tit is also not as strong as some of their competitors, therefore, there is a hurdle of recognition. * GMR International is a non EU and non US organization * People are varying of working for a company, which is Indian by origin, yet headquartered in London. * People are not prepared to leave their jobs to work for a company with less work experience; limited recognition as a brand; and with limited track record. 3.3 Outlining the Recruitment Process â€Å"In the process of recruitment, in the first instance, sources of prospective employees are located. In other words, from where the employees would be available. Thereafter, these sources are approached and efforts are made to attract the interested people to the organization.† (Foot and Hook, 2005) The recruitment process at GMR International is not too different from those of other companies in UK. They look at the activities set out for the year ahead and map it out according to the capacity that they have in their organization. When they do this, there are obviously, some gaps that need to be filled in, in order for them to work on some projects. In order to fill in these gaps, the organization makes certain decisions as to how to do this. This can be done by 4 methods, 1. They could recruit temporary people 2. They could get people on contract 3. They could get that particular piece of work done somewhere else (outsource) 4. They could hire someone to do that job When they go ahead and choose the fourth option, they look at as to how to approach the market, in the following ways, * E- enabled vehicles – for the more junior staff as a lot of such recruitment takes place on web based applications. * They do not give much importance to the employees referral program * They tend to use agencies; search firms for the bigger, more senior positions * For the more junior staff, they recruit within UK. * As the position increases with seniority, they tend to engage colleagues from other offices to help them out, in case it can be managed within the GMR family. 3.4 Post Recruitment & Selection At GMR, they are not very firm in their services to keep an employee with them. They do not have a support system or an evaluation program. â€Å"Normally, at a firm, there is an evaluation program and a support system for the first 6 months. In this program, they make a check on the new employee on day 1; week 1; month 1; month 6. While, they have tried to be stricter in this aspect and tried different techniques for keeping an employee happy and with them, it has not always worked well with them. 4. EXPATRIATES With globalization shaping our world, organisations are trying to expand their marketplace in order to increase their competitiveness. In the industrialized countries, international working has become a common feature and the contact between different cultures becomes a regular thing in people’s social and professional lives. â€Å"International HRM involves striking an appropriate balance between global integration and local adaptation in terms of resourcing, training and developing personnel, reward and performance management, employment relations including communications, and health and welfare† (Porter, Bingham and Simmonds, 2008, p.400). So in this process of internationalisation, companies need to move people around and they have to make sure that they do it in an effective way because of the high costs involved. Expatriates have to deal with the changing they are going to occur, in culture, workplace, country and many more, the company must be sure to prepare them appropriately in order to get the best from their experience both in the new location and back home when they finish their period. According to Tayeb (1996), some companies such as Natwest in the UK, Philips in the Netherlands and Groupe Total in France conduct extensive international in-house seminars. In these courses they cover national culture differences, family adaptation, local politics and laws and international finance, more over some firms send their future expatriates, together with their family, to special language courses. Paul Colwell, former lecturer and HRM manager at Regents College states that an expatriate cost on average $250.000, or even more, which shows the importance of a good HRM strategy. An expatriate should receive the right support before, in the mean while and after his experience abroad. Before he leaves, the company should prepare him to live in another country, through teaching the culture aspects (food, climate, politics and laws, standard behaviour etc.), suggesting him not to sell his house in his home town, because if something goes wrong with his experience it would be way better to have some place in which he can to return. The language is an important factor in order to make him effective in his new workplace and the company should provide him the possibility of language classes to attend. All of these pre-departure trainings should be joined by the whole family, in fact while for the local employees the company don’t care about their family affairs, when you take in examination an expatriate the whole family becomes the company’s business. Experience shows that the majority failures in expatriate’s program come from family problem and complaints. After the departure, a good way of managing expatriate, according to the theory, is to take care about their house in the origin country (rent it or doing the maintenance needed) and to find a house where they are going to live in the new country, taking in consideration the location and the comfort they might need. A good communication with the expatriate during the whole experience should be maintained in order to prevent possible problems and to show him that the company doesn’t leave him alone. The company should take care of the partner job in the new country (or/and hobbies) and register their children in schools in order to make sure that the employee’s family is comfortable in the new location. The return of the expatriate is an important moment, too often underestimated. The company priority is to make sure not to lose all the money it has invested on him by making him decide to change job. An interview at the return it is a necessary step, as offering him the right position deserved in the company and not the same job he had before he left in order to maintain him motivated and happy, so they are not losing all the know how he gained through his years abroad. The period of the experience abroad it is variable, but following Paul Coldwell experience 3 years is and ideal length, because after that the employee may lose some of the attraction and interest in the job and start to decrease his learning. 4.1 GMR Policy Following the interview with the GMR HRM Manager, we found out that they do very little for their expatriates, mostly because they just started their internationalisation and they are a medium entity in the business. They don’t offer any pre-departure preparation, leaving it to the employee’s arbitrariness, they only thing they offer is a period of time that they could spend in the new country with their family in order to decide or not to go. GMR take about their VISA and immigration laws, moreover they find and pay the house in the new country, making sure that it is nice and well located. Moreover they pay for the double taxation (when it occurs) and they offer help in moving their employee’s furniture when requested, paying for it. Their typical expatriate appointment last 2 years, according with GMR HRM manager. As seen so far their expatriate strategy is very poor and just offer little helps to their employees, leaving a high risk of failure and waste of money. 4.2 Proposed Plan GMR in order to increase their competitiveness should set a better strategy for its expatriates. First of all the pre-departure preparation should be compulsory for everyone who decides to apply for an expatriate experience and should comprehend the whole family (especially for language classes), because they shouldn’t take the risk that their employees arrive in the new country and they are not able to integrate in the new position. GMR services to their expatriates, such as find a house, take care of the VISA and pay for the possible double taxation, are a good starting point but it is not enough if they want to make sure their expatriate’s program will be more effective. The company should take care of their expatriates’ proprieties in their home country, they definitively have to be more connected with their employees’ partners, in order to find them a job in the new country that would fit their current position, or/and taking care about their hobbies and their children necessities (such as school and sports). Eventually they have to develop a better repatriation system with complete feedback interviews and placing them in the position they deserve in order to gain value from their experience. 5. CULTURE â€Å"The collective programming of the mind that distinguishes the member of one category of people from another† (Lewis, 2006, p. 17) 5.1 Organizational Culture â€Å"The culture of an organisation refers to the unique configuration of norms, values, beliefs, ways of behaving and so on that characterize the manner in which groups and individuals combine to get things done. The distinctiveness of a particular organisation is intimately bound up with. (Brown, 1998) It is always said that the knowledge sharing culture is part of good knowledge management initiative. It is said that effective collaboration and communication across a whole organisational structure spreads knowledge throughout. In order to change the current culture of the organisation the change needs to be initiated at individual level. Employees have a sphere of influence along with their own individual knowledge, and this is where he believes a knowledge sharing culture can begin. GMR as an Indian based company, headquartered in Bangalore with offices in different countries as well such as U.K, Turkey, Singapore and Dubai, have identified the need of bring the different cultures together. As this company has to hire multicultural staff as part of their induction programme, most of their staff goes to India, to learn GMR history, values and operations through education workshop and its annual performance reviews. Working for an Indian company, which has strong culture and values and beliefs, employees have to manage the transition from their experiences. GMR has employees from the multicultural regions. Whereas, it is an Indian family business organisation and they glue the bonds whether it is Singapore, Turkey or Dubai. They share their values to India and initially they engage with their employees for first 4-5 years of the company to give them awareness about the company whether they can live by them and able to promote them to other positions. That is how they bring multicultural nationalities under the GMR brand. Therefore, there is a lot of difference between the 2 cultures. There are a lot of differences and similarities between the companies in which people have seen few things before in their previous organisations or the things they haven’t seen before, in GMR. â€Å"Individuals will have to adjust for the organisation but organisations will not adjust for individuals.† As GMR is an entrepreneur company, it has a very high regard for social responsibility. It has a set of values and cultures that can be shared and they are not company confidential. 5.2 Shared knowledge Culture is a shared phenomenon that people develop over time in response to shared experiences, which engender agreed values and mode of behaviours and which foster a similar outlook on the world. Working patterns that encourage people to engage in closed co-ordination and communication, which encourage them to identify the same problem and share the certain solution, and goals will be conducive to the formation of sub culture. (Brown, 1998) In GMR has focused knowledge transference culture among their 500 employees on the multiple layers. Employees have ongoing dialogues with the CEO on the day-to-day basis and once in a month everyone comes over for a breakfast in order to promote feedback in two-way direction. The biggest challenge for GMR is that how they leverage the knowledge within the Indian organisation with international organisation and back and forth. As Indian organisation is very process orientated and has a lot of process put in place around knowledge sharing. It hasn’t gained that much attraction outside India as it could have. The company is still improving in the knowledge sharing aspect. The firm still need to put some enthusiasm in the knowledge sharing as knowledge sharing is not a common concept in UK, Turkey, Singapore and with the Bangalore colleagues and then back to the international locations. Whereas, people think it’s a burden instead of an opportunity. They need to change the mindset of the people that they can learn something by being a recipient of knowledge.

buy custom Prediction of Future Conflicts essay

buy custom Prediction of Future Conflicts essay The clash of Civilizations is a theory that Huntington proposed in his article The Clash of Civilizations (1993) and his book The clash of civilizations and the remaking of world order (1996). Based on the assertion that similarity between ideas, individuals, parties or states causes peaceful relations whereas a difference generates conflicts and disorder, Huntington suggests that culture and cultural identities will be the leading causes of war in the post Cold War world. Culture and cultural identities; they are fundamentally civilization identities, are presently the main shapers of the patterns of conflict, disintegration and cohesion in the post-Cold War. This paper discusses the reasons why this theory is a strong predictor of the future conflicts. It is crucial to note that the main thesis of this theory is that the great divisions that will occur among humankind and the leading source of conflict are to be cultural. In this line, he divides the cultures of the world into seven civilizations: the Western civilization: consists of the West and Central Europe, Australia and the North America; the Latin American civilization, which involves the Central and South America; Buddhist civilization is mainly Asian states; Confucian civilization which is China and its Diaspora, Singapore, Taiwan; Hindu civilization, which is India ad Nepal; Japanese civilization; African civilization and Islamic civilization. From this division, Huntington indicates that the conflicts will most likely occur between the Western civilization that currently dominates the worlds power and its greatest challengers that include Islamic and Confucian civilizations. It is evident that the East Asia, China in particular, is a significant threat to the West due to the rapid economic growth. The US, for instance, worries of what the Rise of China can do to its status of being the worlds superpower, considering that the Chinese military continues to get stronger. Additionally, the Islamic civilization also threatens the West. This is clear since the September 9/11 incident that led to the US militarys invasion to Muslim countries; especially Afghanistan where they recently killed the Al-Qaeda leader. Most of the Islam civilizations possess the Anti-Americanism attitude and general opposition to the West and its culture and ideas. The pattern and history of events that take place between these two civilizations only m ake one expect the worst in future. Also, according to Huntington, he sees some states as the swing-states. Such countries are those that will favor either the West, or its challengers. They include India, Russia and Japan. Their acts will destabilize the world further since thheir affiliations are not clear, though their power is hefty enough to cause the significant changes. Another prediction is that there will be future conflicts between Muslims and non-Muslims. This will mainly be found along their borders. The conflicts in Sudan, Bosnia, Nigeria, Philippines and Kashmir are a proof of this. Historical clashes of Muslims and Christians date back to the middle ages, and both Islam and Christianity are universal religions, whose mission is to spread their faith; which are the main reasons for the current as well as future conflicts between the Islamic civilizations and the Christian-West civilizations where attack on Iraq is a proof of this. In conclusion, ethnic conflicts and cultural differences are extremely relevant issues for shaping international politics. Since the ethnic identities and cultural affiliations are responsible for making group relations, the conflicts have caused extreme human suffering and remain a crucial threat to the international security. From the above explanations, it is clear that the clash of civilizations has been the main contributor of wars and can, according to the current global situation among civilizations, only predict a future recurrent of conflicts. Given the complexity associated with cultural and ethnic conflicts, there is no direct solution of solving issues relating to them. Buy custom Prediction of Future Conflicts essay